| Inflammability |
EN 13501-1 |
Bfl-S11 |
| Slip Resistance |
EN 13893 |
DS |
| Slip restraint |
EN 16165 Annex B |
R10 |
| Residual indentation |
EN ISO 24343-1 |
norm ≤ 0.10 mm |
| Furniture leg resistance |
EN ISO 16581 |
PASS |
| Curling |
EN ISO 23999 |
≤ 8 mm |
| Electrical resistance |
EN 1081 |
3.99 x 108 Ohm |
| Static electrical propensity |
EN 1815 |
≤ 2kV (antistatic) |
| Dimensional stability |
EN ISO 23999 |
norm ≤ 0.40% |
| Thermal conductivity |
ISO 8302 (1991) |
0.130 W/(m.K) |
| Heat insulation |
EN 12667:2001-01 |
0.0153 (m².K/W) |
| Binder quantity in wear layer |
EN 10582 |
Type I |
| Abrasion group |
EN 660-2 |
Class T |
| Indoor air quality |
|
LOW VOC |
| Acoustic insulation |
EN ISO 717-2 |
ΔLw 8 dB |
| Castor chair resistance |
EN ISO 4918 |
Pass |
| Castor type |
EN 12529 |
Type W |
| Light fastness |
ISO 105-B02 |
≥ 6 |
| Underfloor heating |
EN 12524/EN 12667 |
Suitable ≤ 27°C |
| Resistance to chemicals |
EN ISO 26987 |
Very good |
| Hot welding |
|
Available |
| Cold welding |
Invisiweld |
Suitable |
| Commercial warranty2 |
|
15 years |
1Tested on concrete subfloor (Cfl-S1 on wood).
2The warranty covers manufacturing defects and premature wear in the event of normal use. The products do not contain any substances from the current candidate list published by ECHA (substances of very high concern) to be published under the REACH regulation. Exclude any rubber parts that may come into direct contact with the flooring (chair ends, furniture, wheels). Use only PVC or polyethylene components. IVC reserves the right to change or amend any written information without notice. Ensure the latest information is being consulted by referring to the website.
